How to choosing CNC machine tools
How to choosing the suitable CNC machine tools? you need to pay attention for the following.
A. Reasonably determine the functions of CNC machine tools
When selecting the functions of CNC machine tools, you should not pursue large and complete functions, because excessive pursuit of CNC machine tools with more coordinate axes, large worktable and motor power, high machining accuracy, and complete functions will make the system more complex and less reliable. Purchase costs and maintenance costs will also increase. This aspect will increase the processing cost accordingly. On the other hand, it will cause a great waste of resources. Therefore, the CNC machine tools should be selected according to the product specifications, dimensions, precision, etc.
B. Determine the parts to be processed.
CNC machine tools should be reasonably selected according to the typical parts that need to be processed. Although CNC machine tools have the characteristics of high flexibility and strong adaptability, they can only achieve the best by processing certain parts under certain conditions. Effect. Therefore, before determining the purchase equipment, you must first determine the typical parts to be processed.
C. Reasonable selection of numerical control system
The numerical control system (CNC) that can meet the requirements of various performance parameters and reliability indexes should be considered in detail, and the ease of operation, programming, maintenance and management should be considered. Try to concentrate and unify as much as possible. If it is not a special case, try to use the same series of CNC systems that are familiar to the unit and produced by the same manufacturer for future management and maintenance.
D. Configure necessary accessories and tools
In order to give full play to the role of CNC machine tools and enhance their processing capabilities, necessary accessories and tools must be configured. Never use a machine tool that has been purchased for hundreds of thousands of yuan or millions of dollars because it lacks an accessory or tool that costs tens of yuan and cannot be used normally. Prepare tools with good performance. It is one of the key measures to reduce costs and obtain maximum comprehensive economic benefits. Generally, CNC machine tools should be equipped with enough tools to give full play to the functions of CNC machine tools, so that the selected CNC machine tools can process multiple product varieties and prevent unnecessary idleness and waste.
E. Pay attention to the installation, debugging and acceptance of CNC machine tools.
After entering the factory, CNC machine tools must be carefully installed and debugged. This is very important for future operation, maintenance and management. During the installation, commissioning and trial operation of CNC machine tools, technicians must actively participate, study carefully, and accept technical training and on-site guidance from suppliers humbly. Comprehensive acceptance of the geometric accuracy, positioning accuracy, cutting accuracy, and machine performance of CNC machine tools. Carefully check the supporting various technical data, user manuals, maintenance manuals, accessory manuals, computer software and manuals, etc., and keep them properly, otherwise it will cause some additional functions to be unable to be developed in the future and bring difficulties to the maintenance and maintenance of the machine tool .
Finally, we must fully consider the after-sales service, technical support, personnel training, data matching, software support, installation and commissioning, spare parts supply, tool systems and machine tool accessories of CNC machine tool manufacturers.
Taiye Machine tools, Economical and practical, easy to use, to provide you with a complete set of extrusion die production CNC equipment solutions.
