Features and Benefits of WEDM EDM machine
The wire cutting EDM machine has multiple cutting functions (same as the slow wire cutting). During processing, the control system will automatically adjust the processing parameters (high-frequency pulse width, pulse interval, number of power tubes) according to the programming. and wire speed), and the processing parameters can also be changed manually during processing to make appropriate adjustments.
The medium-travel wire-cut EDM machine has the processing method of three-running and two-running. This processing method is the processing method used by most of the medium-speed wire-traveling on the market. The processing principle of this method is that the wire is automatically reversed. Go in the opposite direction for another two seconds to ensure that the molybdenum wire gradually moves forward. The running time of most of the machine tools on the market is fixed and cannot be changed, but this control system can be adjusted in time, and the time can be adjusted arbitrarily from 3 seconds to 10 seconds to suit the processing requirements and avoid unnecessary waste. However, this method is suitable for processing occasions where the requirements are not very high, because although there are no streaks visible to the naked eye on the surface of the processed objects, there are still some, just because the processing steps are narrowed and too dense to be seen.
The wire-cut EDM machine has a unilateral electric discharge machining method. The unilateral electric discharge machining process is that the molybdenum wire is discharged in one direction, and it is not discharged in the reverse direction. Better because it only discharges in one direction and will not cause molybdenum wire traces (lines). The above processing technology, its surface finish is not as good as multiple cutting, because it is a one-cut processing method, there are discharge particles on the surface, and multiple cutting is because the final use of small current, slow speed technology, the processing surface is smooth, and its effect is close to the slow wire. The processing effect of cutting is an ideal choice to replace part of the slow wire processing.
Taiye Machinery was founded in 2005, the company is located in the beautiful Zhejiang, China，Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, We have an aluminum extrusion die factory and a professional extrusion die equipment company in China. Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc.
