How to maintain CNC lathes?
CNC lathe is needs an oil change service, fully automatic CNC lathe is the same with your car, buy to return in the future must pay attention to the health mesa, let dust and scrap iron could not enter into the trajectory, in is bad happened after the precision variation and feel is heavier, rolled up on a heavy and difficult, so the early stage of the new fully automatic CNC lathe should oil change once a month, Change it every three months of the year. Make sure you change it three times in the first three months. CNC lathe oil change, CNC lathe track impurities will be reduced, it will follow the new oil into the oil tank, will not stay in the track, will not scratch the track. How to maintain CNC machine tools?
1. Check the lubricating oil level to ensure smooth machine tool.
2. Check whether the coolant in the coolant box is enough. If not, increase it in time.
3. Check the oil level height of the pneumatic triplet, which is about 2/3 of the height of the entire tubing. The water and air in the filter tank of pneumatic triplet will be discharged by the drainage switch every day.
4, check the air pressure, relax the adjustment knob, according to the principle of right-handed pressurization, left-handed decompression pressure adjustment, generally set to 5 ~ 7KG/CM2. Generally, the pressure switch is set to 5KG/CM2. When the pressure is lower than 5KG/CM2, the alarm will be generated. When the pressure increases, the alarm information will disappear.
5, check the CNC lathe spindle inner cone hole air blowing is normal, clean the spindle inner cone hole with clean cotton cloth, and spray light oil
Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc., Each of taiye machines is professionally customized for the aluminum extrusion die process, with simple operation and high efficiency.
- 3 Axis Vertical Machining Center
- 3 Axis Hard Line Vertical Machining Center
- 3 Axis 2 Linear One Hard Line Vertical Machining Center
- 3 Axis Linear One Line Vertical Machining Center
- Heat Treatment Vacuum Furnace
- Heat Treatment Oil Quenching Vacuum Furnace
- Heat Treatment Air Quenching Vacuum Furnace
