How to reasonably use hydraulic oil in hydraulic machine
The hydraulic oil is important for the CNC machine tools. How to use the hydraulic oil in the hydraulic press correctly and reasonably, let Taiye Machinery introduce you
1. The system must be cleaned before changing the oil. The hydraulic system must be thoroughly cleaned before using hydraulic oil for the first time. When replacing the same type of hydraulic oil, it must be flushed 1-2 times with the new hydraulic oil.
2. Hydraulic oil cannot be mixed at will. If a certain brand of hydraulic oil has been determined to be used, it must be used alone. Without the consent of the hydraulic equipment manufacturer and without scientific basis, it is not allowed to mix with hydraulic oils of different viscosity grades, or with hydraulic oils of the same viscosity grade but not the same manufacturer, and not to mix with other types of oils.
3. Pay attention to the good sealing of the hydraulic system. The hydraulic system using hydraulic oil must maintain a strict seal to prevent leakage and the mixing of various external contaminants.
4. Replace the hydraulic oil in time according to the oil change index. The hydraulic oil in the hydraulic press should be regularly sampled and tested. Once the physical and chemical indicators in the oil reach the oil change indicators, the oil must be changed.
- 3 Axis Vertical Machining Center
- 3 Axis Hard Line Vertical Machining Center
- 3 Axis 2 Linear One Hard Line Vertical Machining Center
- 3 Axis Linear One Line Vertical Machining Center
- Heat Treatment Vacuum Furnace
- Heat Treatment Oil Quenching Vacuum Furnace
- Heat Treatment Air Quenching Vacuum Furnace
