How to save thread turning tool?
Thread turning tool is the tool which we are more familiar, so, how to use thread turning tool reasonably?
1. The greater the cutting depth, the longer the contact time between the tool and the material, the more friction heating, in order to avoid the thermal erosion of the tool carbide head, it is necessary to increase the amount of water cooling tool head. In order to throw the material, reduce the contact probability of the tool and the material under the car, reduce the wear of the thread turning blade.
2 according to the size of the cutting power to choose the tool
3. Every 6 to 8 hours to check the rotation and wear of the thread turning tool, to ensure that the installed tool can rotate freely in the hole of the tool seat, and the tool wear should be replaced in time. The length of the cutting tool has a great influence on the construction quality. When replacing the cutting tool, try to ensure the same length of the cutting tool.
There are two reasons for replacing thread turning tools.
1. With the wear of the tool tip, the diameter of the tool tip becomes larger, leading to the reduction of cutting ability, thus reducing the operating efficiency of the machine. Secondly, the wear of the thread turning tool leads to the different diameter of the cutting circle, the workpiece surface is not smooth, and the operation quality of the machine is reduced.
2. Although delayed thread turning tool replacement, so that it continues to work in the state of wear, can save the cost of the tool head, but the blunt tool head will reduce the working speed, reduce cutting output. Therefore, timely replacement of worn thread turning blades is beneficial to improve economic benefits.
Taiye Machinery was founded in 2005, the company is located in the beautiful Zhejiang, China，Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, We have an aluminum extrusion die factory and a professional extrusion die equipment company in China. Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc., Each of taiye machines is professionally customized for the aluminum extrusion die process, with simple operation and high efficiency.
- 3 Axis Vertical Machining Center
- 3 Axis Hard Line Vertical Machining Center
- 3 Axis 2 Linear One Hard Line Vertical Machining Center
- 3 Axis Linear One Line Vertical Machining Center
- Heat Treatment Vacuum Furnace
- Heat Treatment Oil Quenching Vacuum Furnace
- Heat Treatment Air Quenching Vacuum Furnace
