What matters needing attention in the use of ordinary lathes
The normal use of ordinary lathes must meet the following conditions: the power supply voltage fluctuation at the location of the machine tool is small, the ambient temperature is lower than 30 degrees Celsius, and the relative humidity is less than 80%.
1. Environmental requirements for the location of the machine tool
The location of the machine tool should be far away from the vibration source, direct sunlight and thermal radiation should be avoided, and the influence of humidity and airflow should be avoided. If there is a vibration source near the machine tool, anti-vibration grooves should be set around the machine tool. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, which will cause poor contact of the electronic components, failure, and affect the reliability of the machine tool.
2. Power requirements
Generally, ordinary lathes are installed in the machining workshop, not only the ambient temperature changes greatly, the use conditions are poor, but also there are many kinds of electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location where ordinary lathes are installed requires strict control of the power supply voltage. Power supply voltage fluctuations must be within the allowable range and remain relatively stable. Otherwise, the normal operation of the CNC system will be affected.
3. Temperature conditions
The ambient temperature of ordinary lathes is lower than 30 degrees Celsius, and the relative temperature is less than 80%. Generally speaking, an exhaust fan or a cooling fan is installed inside the CNC electric control box to keep the working temperature of the electronic components, especially the central processing unit, constant or the temperature difference changes very little. Excessive temperature and humidity will reduce the life of control system components and lead to increased failures. The increase of temperature and humidity, and the increase of dust will cause bonding on the integrated circuit board and cause short circuit.
4. Use the machine tool as specified in the manual
When using the machine tool, the user is not allowed to change the parameters set by the manufacturer in the control system at will. The setting of these parameters is directly related to the dynamic characteristics of each component of the machine tool. Only the backlash compensation parameter values can be adjusted according to the actual situation.
The user cannot change the accessories of the machine tool at will, such as using the hydraulic chuck beyond the specification. The manufacturer fully considers the matching of various link parameters when setting accessories. Blind replacement results in mismatch of parameters in various links, and even causes unexpected accidents. The pressure of the hydraulic chuck, hydraulic tool rest, hydraulic tailstock and hydraulic cylinder should be within the allowable stress range, and it is not allowed to increase arbitrarily.
Taiye Machinery was founded in 2005, the company is located in the beautiful Zhejiang, China，Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, We have an aluminum extrusion die factory and a professional extrusion die equipment company in China. Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc.
