CNC machining process
Do you know how to distinguish the machining process of CNC machine tools? let's us introduce it for you
1. The tool clustering and sorting method is to distinguish the processes according to the commonly used tools, and use the same tool to process all the positions on the part that can be completed. In other positions where they can with the second knife and the third. In this way, the number of tool changes can be reduced, the idle time can be compressed, and the redundant positioning deviation can be reduced.
2. For parts with many processing contents, the processing part can be divided into several parts according to their structural characteristics, such as inner shape, outer shape, curved surface or plane, etc. Usually, the plane and positioning surface are processed first, and then the hole is processed; the simple geometric shape is processed first, and then the complicated geometric shape is processed; the position with lower precision is processed first, and then the position with higher precision is processed.
3. The rough and finish machining sequence method is used for parts that are prone to machining deformation. Because the deformation is likely to occur after rough machining, it is necessary to correct the shape. Therefore, under normal circumstances, if rough machining and finishing are required, the process needs to be separated. . In general, when distinguishing the processes, it is necessary to flexibly grasp the structure and craftsmanship of the parts, the function of the CNC lathe, the number of CNC machining content of the parts, the number of installations and the production organization of the unit. It is also proposed to select the standard of process aggregation or the standard of process dispersion, which should be clarified according to the specific situation, but must strive to be effective.
Taiye Machinery was founded in 2005, the company is located in the beautiful Zhejiang, China，Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, We have an aluminum extrusion die factory and a professional extrusion die equipment company in China. Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc.
- 3 Axis Vertical Machining Center
- 3 Axis Hard Line Vertical Machining Center
- 3 Axis 2 Linear One Hard Line Vertical Machining Center
- 3 Axis Linear One Line Vertical Machining Center
- Heat Treatment Vacuum Furnace
- Heat Treatment Oil Quenching Vacuum Furnace
- Heat Treatment Air Quenching Vacuum Furnace
