Service life and replacement time of wire-cut eye film
Wire-cut eye film is also called wire guide, or gemstone nozzle. Is used for wire cutting processing in an auxiliary accessories, is also a kind of general consumable, in the thread cutting processing role is to reduce the molybdenum wire jitter, improve the processing finish, prolong the life of the wheel.
The eye film itself is a kind of consumable, wear and tear. Its service life is limited, depending on the application and the quality of the eye mask itself. There are three main factors affecting the service life and replacement time of eye film.
1. Working hours
It is said that the service life of the thread cutting consumables is generally used by day or month, so the boot 10 hours a day and the boot 20 hours a day is not the same, if it is 10 hours a day, and not cut the taper, the service life of a pair of eye film can be about 6 months. If you cut 20 hours a day, the service life is about 3 to 4 months.
2. Whether to cut the taper
In the thread cutting processing taper is more consumption of eye film, often cut taper, large taper and not cut taper eye film service life will be much worse, often cut taper machine eye film service life will generally be halved or even more.
3. Quality of eye film
Eye film as a standard general consumables, there are a lot of brand products on the market, the quality is uneven, good eye mask in the normal use of the service life of about 6 months, the poor can only be used for one or two months, even less than a week. So the replacement time of the wire-cut eye film depends on the specific use of the main judgment basis is the quality of the processing effect, by looking at the effect of the processing workpiece or the use of molybdenum wire, wire feeling, etc.
Taiye Machinery was founded in 2005, the company is located in the beautiful Zhejiang, China，Taiye machine provide a full set of professional extrusion die equipment and extrusion dies, We have an aluminum extrusion die factory and a professional extrusion die equipment company in China. Our machine tools product include machining center, CNC lathe, wire cut EDM machine, EDM machine, Vacuum Furnace, etc.
- 3 Axis Vertical Machining Center
- 3 Axis Hard Line Vertical Machining Center
- 3 Axis 2 Linear One Hard Line Vertical Machining Center
- 3 Axis Linear One Line Vertical Machining Center
- Heat Treatment Vacuum Furnace
- Heat Treatment Oil Quenching Vacuum Furnace
- Heat Treatment Air Quenching Vacuum Furnace
